Enhanced Non-dispersion Shifted Single-mode Fiber G.652D

SDGI's enhanced single-mode fiber can provide the best transmission performance at the wavelength range from 1260nm to 1625nm, and acquires a minimum dispersion at the working window of 1310nm. The low loss at "water peak" (1383nm) ensures the availability of E- wave (1360 - 1460nm). Enhanced single-mode fiber supports such a broadband range that enables voice, data, and video services to be deployed flexibly within a single fiber. SDGI's enhanced single-mode
More

Stranded Loose Tube Steel Wire Armored Optical Fiber Cable GYTA33 (2-44cores)

Installation: Underwater, direct- burial, climbing. Structural features: Non- metallic (FRP)/ Metallic (phosphate steel wire) central strength member, double plastic-coated aluminum tape- PE laminated inner sheath, steel wire armor- PE laminated outer sheath.
More

Stranded Loose Tube Figure-8 Shape Self-Supporting Optical Fiber Cable GYTC8S[A] (2-144 cores)

Installation: Self-supporting aerial. Structural features: Figure- 8 cross-sections, stranded steel wires messenger, double plastic-coated corrugated steel tape- PE bonded outer sheath.
More

FRP-armored Self-supporting Optical Fiber Cable

Characteristics • All-dielectric self-supporting overhead installation. • Protect the optical fiber cable from rodents by the solidness of FRP armor and the sharpness of fiberglass of it after being bitten by Rod-type FRP reinforced armor for rodent prevention.
More

Aluminum Conductor Steel Reinforced ACSR

Aluminum conductor steel reinforced (ACSR) is a type of reinforced conductor with a single layer or multiple layers of aluminum strand stranded outside the galvanized steel wire, it is mainly applied to the power and transmission line industry. For the transmission line with high voltage, due to the limited line path, and multiple lines cannot be erected in a single path
More

Fiber Optic Splitter

Planar lightwave circuit splitter(PLC Splitter) is an integrated lightwave optical power distribution device based on a quartz substrate.The splitter loss in optical fiber is low. And it has many characteristics, such as compact structure design, wide operating wavelength range, high reliability, low insertion loss, low polarization dependant loss and good channel uniformity and so on. It is especially suitable for the connection between the central office and terminal equipment in the Passive Network (BPON, EPON,GPON, etc.), and can achieve the distribution of optical signals.
More

Multi-fiber Push On Connector-MPO

Multi-fiber Push On Connector(MPO) is a type of optical connector, It has been standardized within the IEC 61754-7 and TIA 604-5. Product specifications have 12-24 fiber designs.
More

10,000 Gigabit multi-mode soft jump fiber FC-FC-OM3 single core

More
licheng@sdgi.com.cn
86-755-26506800
top